Skip to content
The basics

What are the garage door buttons in my car?

Many cars have a row of three small buttons that open garage doors and gates. Most people never use them, because nobody explains what they are.

Updated November 12, 2026

The short answer

They’re HomeLink, a garage door opener built into the car. Each button can copy one of your remotes, so you can leave the remote at home and press the car’s button instead.

Where to find them

Look for three buttons, often marked with a small house, a garage or one to three bars, plus a small light.

How to set them up

The car listens to your remote and copies it. The steps vary by car, but they usually go like this:

  1. Hold your remote close to the car’s buttons.
  2. Press and hold the car button you want to use and the remote’s button together, until the car’s light changes.
  3. Many openers also need you to press a Learn button on the opener itself, then press the car’s button again.

What they can’t learn

These buttons learn most home garage door remotes, but not the 900 MHz remotes many apartment buildings, condos and offices use, like BEA’s.

Your car’s garage buttons BEA remote
300400500600700800900
Radio signal, in MHz. Your car’s buttons learn 288 to 433. BEA remotes use 908 to 918.

If your building’s remote says 900 MHz, 915 MHz or 908–918 MHz on the back, your car can’t learn it. Here’s what to do.

Questions

What are the three buttons on my rearview mirror or visor?

They’re HomeLink, a garage door opener built into many cars. Each button can learn a separate remote, such as a garage door, a gate and a light.

How do I know if my car has HomeLink?

Look for three buttons with small house or bar icons on the sun visor, the rearview mirror or the overhead console, often with a small light. Some cars put them on the center touchscreen instead.

What can’t HomeLink learn?

900 MHz remotes, like the BEA remotes many apartment and condo buildings use. If you have a BEA remote, Pontaly can make it work with your car.