Skip to content
BEA remote and your car

Can you program a BEA remote into your car?

Your building gave you a small BEA remote for the garage, gate or door. Your car has garage door buttons built in. Getting the two to work together is where most people get stuck.

Updated November 12, 2026

The short answer

Not on its own. BEA remotes use a radio signal that the garage door buttons in cars can’t hear, so your car can’t learn it. You need something in between, like Pontaly.

Is this your remote?

Turn your remote over. If the label looks like this, this guide is for you.

Look for BEA at the top and 908MHz–918MHz next to Freq. That number is why your car can’t learn it.

Yours may have one button or several. Pontaly works with all of them.

Why your car can’t learn it

The garage door buttons in your car can copy most home garage door remotes. But they only listen for certain radio signals (288 to 433 MHz), and BEA remotes use a different one, 900 MHz.

So your car never hears your remote. The steps in your car’s manual time out, or seem to work and then do nothing.

Your car’s garage buttons BEA remote
300400500600700800900
Radio signal, in MHz. Your car’s buttons learn 288 to 433. BEA remotes use 908 to 918.

What you can do

Keep using the remote

It works, but it rides on the visor or in a cupholder, needs a free hand, and is easy to lose.

Ask your building

Some buildings can add equipment at the door that works with car buttons. That’s up to the property manager.

Use Pontaly Nothing changes at the door

Pontaly lives in your car. It copies your BEA remote and learns your car’s garage door button. Press that button, and the door opens.

How it works with Pontaly

  1. Copy your remote. Hold the top of Pontaly’s button and press your BEA remote a few times. If your remote has more than one button, use the one that opens your door.
  2. Pair your car. In the car, hold the bottom of Pontaly’s button, then program your car’s garage door button the way you would for a new remote.
  3. Drive in. Leave Pontaly plugged into a USB port in your console or glovebox. Press your car’s garage door button, and the door opens.

Questions

Can I program my BEA remote into my car?

No. Your car’s garage door buttons can’t hear the 900 MHz signal BEA remotes use, so the programming steps never finish. You need something in between, like Pontaly.

My remote has more than one button. Does that matter?

No. Pontaly works whether your BEA remote has one button or four. When you set it up, press the button that opens your door.

Is a 900 MHz or 915 MHz remote the same thing?

Yes. Remotes labeled 900 MHz, 915 MHz or 908–918 MHz all use the same kind of signal, and cars can’t learn any of them.

Does Pontaly work with my BEA remote?

Yes. Pontaly is made for BEA remotes like the one above. It copies the remote you already have, so it opens only what your remote opens.

Does anything change at the door?

No. Pontaly works just like the remote your building gave you, from inside your car.